HP NonStop G-Series - Manual (Page 156)

MIOE SAC
The MIOE ServerNet addressable controller (MIOE SAC) is a LAN controller that is a component of the MIOE. Each
MIOE contains one MIOE SAC, which contains one Ethernet port, known as a physical interface (PIF) object.
Location in OSM Tree:System > Group > Module > PMF2 > MIOE > MIOE SAC
Example:MIOE SAC $ZZLAN.MIOE0.0
Attributes
MIOE SAC
Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK.
Values
Service State
Logical
The currently available processors that can access the MIOE CRU.
Example: 0,1 Processor Access List
The state of the component as known to the operating system on the server. Values Device State
The processor to which the MIOE CRU is connected.
Example: 0 Owning Processor
Actions
Abort
Terminates operation of the MIOE SAC. When the Abort action completes, the MIOE SAC is in the Stopped state.
Responsive Test
Runs an online test that verifies that the MIOE SAC is integrated with the LAN subsystem, is owned, and is in the
Started state.
Start
Loads the controller operational code and starts the MIOE SAC. When the Start action finishes, the MIOE SAC is in
the Started state.
Stop
Rather than automatically stopping the MIOE SAC (as the Abort action does), this action first warns you if the SAC is
currently in use (and stops it only after you confirm).
156 System Resources