Optical extender pic, Attributes, Physical – HP NonStop G-Series User Manual
Page 161: Logical, Actions, Power off, Power on, Replace, Set led state, Physical logical
Optical Extender PIC
These (optional) Optical Extender PICs are used only in HP Integrity NonStop systems that include VIO enclosures
(represented in the OSM Service Connection as
). An Optical Extender PIC can be used in slot 2 (NS14000
series, NS1200, or NS1000 only) for additional processor connectivity (processors 4 through 7), slot 3 (NS5000 only)
for NonStop S-series connectivity, and in slot 5 (Integrity NonStop NS14000 series only) for ServerNet cluster
connectivity. Each Optical Extender PIC contains four
NOTE:
Optical Extender PICs are not a subcomponent of VIO modules in S-series servers.
For more information on ServerNet cluster connectivity for VIO enclosures, see the ServerNet Cluster Supplement
for NS-Series.
Location in OSM Tree: System > Fabric Group 100 > Internal ServerNet Fabric > VIO Module > Optical Extender PIC
Example: Optical Extender PIC (100.2.2)
Attributes
Physical
A code that identifies the generation of the component. Hardware revision codes are
used for tracking components.
Hardware Revision
Indicates whether or not the Optical Extender PIC’s amber LED is lit. This state is
determined by the
action.
Value: On or Off
LED State
The part number of the component that was assigned in manufacturing. Use part
numbers for identifying and ordering parts.
Part Number
Indicates whether the component is powered on.
Power State
A unique serial number that identifies the component. Track IDs are used for tracking
components.
Track ID
Identifies the type of ServerNet PIC.
Value: Optical Extender PIC
Type
Logical
The state of the component as known to the operating system on the server.
Device State
Actions
Power Off
Shuts off power to the Optical Extender PIC.
Power On
Restores power to the Optical Extender PIC.
Replace
Launches a service procedure describing how to replace an Optical Extender PIC.
Set LED State
Turns on or off the amber LED located on the Optical Extender PIC. The current state is indicated by the
attribute.
Optical Extender PIC
161