Fcsa fsac, Attributes, Actions – HP NonStop G-Series User Manual
Page 131: Responsive test, Containing the bac, Containing the pr, Node name, Port name
FCSA FSAC
A Fibre Channel SAC (ServerNet addressable controller) is one of two fiber-optic plug-in cards mounted on an
(Fibre Channel ServerNet adapter).
Location in OSM Tree: System > Group > IOAM Enclosure > IOAM > FCSA > FCSA FSAC
Example: FCSA FSAC (100.2.1.1)
NOTE:
The ports on a Fibre Channel ServerNet adapter are numbered from top down when you view the FCSA
installed in a rack. Thus, FCSA FSAC 1 is attached to the upper port (port 1), FCSA FSAC 2 is attached to the lower
port (port 2).
Attributes
FCSA FSAC
Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK.
Service State
A number (read from the hardware) that uniquely identifies each FCSA FSAC. Until
an attached disk is configured and started, the Node Name attribute is displayed as
0xFFFFFFFFFFFFFFF.
Node Name
A number (read from the hardware) that uniquely identifies each Fibre Channel port
connected to the FCSA FSAC. Until an attached disk is configured and started, the
Port Name attribute is displayed as 0xFFFFFFFFFFFFFFF.
Port Name
Actions
Responsive Test
Verifies that the FCSA FSAC is present and responding. (To pass the test, a disk using this FSAC must be configured
and started.)
FCSA FSAC
131