Stop, Test verify, Stop test verify – HP NonStop G-Series User Manual

Page 136

Text mode
Original mode

Stop

Stops the ServerNet/FX or ServerNet/FX 2 adapter field-replaceable unit (FRU) that is in the Started state. When the
Stop action completes, the FRU is in the Stopped state.

Test Verify

Runs all the firmware diagnostic tests on the ServerNet/FX or ServerNet/FX 2 adapter field-replaceable unit (FRU).
This test takes about 10 minutes to complete. You must use the Stop action to place the FRU in the Stopped state
before you initiate the Test Verify action.

136

System Resources