HP NonStop G-Series - Manual (Page 215)

VIO FCSA
In a system containing VIO enclosures (represented in the OSM Service Connection as VIO modules ), OSM displays
an FCSA object to represent:
•
In slot 1, the four built-in Fibre Channel ports that provide the functional equivalent of a Fibre Channel ServerNet
adapter.
•
In slot 7, an optional expansion VIO FCSA.
NOTE: VIO FCSA is not a subcomponent of VIO modules in S-series servers.
OSM does not display VIO FCSA attribute information until an associated disk process is configured and started. For
more information, see the Versatile I/O (VIO) Manual.
Location in OSM Tree: System > Fabric Group 100 > Internal ServerNet Fabric > VIO Module > FCSA (In the
Multi-Resource Actions dialog box, these FCSA objects are displayed as VIO FCSAs)
Example: FCSA (100.3.1)
Attributes
FCSA
Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK.
Values
Service State
Physical
A code that identifies the generation of the component. Hardware revision codes are
used for tracking components. Hardware Revision
The part number of the component that was assigned in manufacturing. Use part
numbers for identifying and ordering parts. Part Number
A unique serial number that identifies the component. Track IDs are used for tracking
components. Track ID
Flash Firmware
Information about the version of the operational firmware located in the Flash memory of the FCSA.
The version of the flash firmware running on the VIO FCSA. Version
The name of the file to be used for a firmware update. Default File Name
The version of the firmware to be used for a firmware update. Default File Version
Indication of the differences, if any, between the current and default firmware versions.
Values
Compare State
Flash Boot Firmware
Information about the version of the boot firmware located in the Flash memory of the FCSA.
The version of the boot firmware running on the VIO FCSA. Version
The name of the file to be used for a firmware update. Default File Name
The version of the firmware to be used for a firmware update . Default File Version
Indication of the differences, if any, between the current and default firmware versions.
Values
Compare State
Actions
Flash Boot Firmware Update
Updates the boot firmware in Flash memory of the VIO FCSA. It is not possible to do this update unless the VIO FCSA
has a disk configured through it. If the Flash Boot Firmware Compare State is Unknown, an update attempt will likely
fail.
VIO FCSA 215