HP NonStop G-Series - Manual (Page 155)

MIOE PIF
The physical interface through which the MIOE is logically connected to the system.
Location in OSM Tree: System > Group > Module > PMF2 > MIOE >MIOE SAC > MIOE PIF
Example: MIOE PIF $ZZLAN.MIOE0.0.A
Attributes
MIOE PIF
Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK.
Values
Service State
Logical
The state of the component as known to the operating system on the server. Values Device State
Lists the processor numbers for processors that have a successful data path to the
PIF. If no processor has a path, "None" is shown.
Example: (1) Processors with Data Path
The media access control (MAC) address of the PIF hardware. Hardware MAC Address
Actions
Abort
Terminates operation of the MIOE PIF. When the Abort action finishes, the PIF is in the Stopped state.
Configure LIF
Configures the associated LIF.
Start
Starts the MIOE PIF. The PIF must be in the Stopped state before you perform this action. When the Start action
completes, the PIF is in the Started state.
Stop
Rather than automatically stopping the MIOE PIF (as the Abort action does), this action first warns you if the PIF is
currently in use (and stops it only after you confirm).
MIOE PIF 155