HP NonStop G-Series - Manual (Page 141)

Dump
Copies a memory image from a G4SA SAC to a file on the local system. The file will be the last (highest numbered)
file of the chain started with the file specified in the
Dump File Name attribute of the SAC.
CAUTION: The SAC and PIFs will be unavailable while the SAC is being dumped.
Firmware Update
Updates the boot firmware for the G4SA SAC.
Responsive Test
Runs an online test that verifies the SAC is integrated with the LAN subsystem, is owned, and is in the Started state.
Start
Loads the controller operational code and starts the ServerNet addressable controller. The SAC must be in the Stopped
state before you perform this action. When the Start action completes, the SAC is in the Started state.
Stop
Rather than automatically stopping the G4SA SAC (as the Abort action does), this action first warns you if the SAC
is currently in use (and stops it only after you confirm).
Test Verify
Runs the power-on self-test for the SAC.
G4SA SAC 141