Fcdm collection, Attributes, Path b – HP NonStop G-Series User Manual
Page 127: Path a, Actions, Fcdm collection path b path a, Under an
FCDM Collection
The OSM Service Connection displays all
Fibre Channel disk modules (FCDMs)
within FCDM Collection objects,
whether or not they are daisy-chained. FCDMs that are daisy-chained together (up to four) are displayed within the
same FCDM Collection object. If an FCDM Collection object contains only one FCDM, it is not daisy-chained. Other
FCDMs that are not daisy-chained appear under separate in FCDM Collection objects.
The FCDM Collection object appears within the same group object as the IOAM enclosure to which the FCDM is
connected. If the FCDM is connected to Fibre Channel ServerNet adapters located in different IOAM enclosures (for
increased fault tolerance), OSM displays the FCDM Collection in the lower-numbered group.
For information on daisy-chaining FCDMs, see the Modular I/O Installation and Configuration Guide in NTL.
Location in OSM Tree: System > Group > FCDM Collection
Example: FCDM Collection (111.211)
Attributes
FCDM Collection
Displayed in the Attributes tab and Attributes dialog box only if the value is something other than
OK.
Service State
Path B
The location of FCSA connected to the disk drive through Port B.
Example: FCSA.FSAC-1.GRP-111.MOD-2.SLOT-1
Configured Controller Location
Identifies the FCSA FSAC connected to the FCDM through Port B.
Example: FCSA FSAC (111.2.1.1)
Fibre Channel Controller
Path A
The location of FCSA connected to the disk drive through Port A.
Example: FCSA.FSAC-1.GRP-111.MOD-3.SLOT-1
Configured Controller Location
Identifies the FCSA FSAC connected to the FCDM through Port A.
Example: FCSA FSAC (111.3.1.1)
Fibre Channel Controller
Actions
None.
FCDM Collection
127