HP NonStop G-Series - Manual (Page 196)

The name of the subnet on the primary TCP/IP process that supports the SWAN
concentrator.
Format: TCPIP process name.subnet name
Example: $ZTCP1.#SN1
Primary Subnet Name
The name of the subnet on the alternate TCP/IP process that supports the SWAN
concentrator.
Format: TCPIP process name.subnet name
Example: $ZTCP3.#SN1
Alternate Subnet Name
The primary gateway IP address configured for the SWAN concentrator.
Example: 192.168.10.30 Primary Gateway IP Address
The alternate gateway IP address configured for the SWAN concentrator.
Example: 192.168.11.30 Alternate Gateway IP Address
Actions
Start
Starts the SWAN concentrator and its associated CLIPs. When the Start action completes, the SWAN concentrator
and its associated CLIPs are in the Started state.
In a multisystem configuration, this action also causes the current system to take control of the associated CLIPs. If
any of the CLIPs are currently controlled by another system, that system loses control of those CLIPs.
Stop
Terminates operation of the SWAN concentrator and all associated SWAN CLIPs. When the Stop action completes,
the SWAN CRU and associated SWAN CLIPs are in the Stopped state.
Verify Logical Configuration
Verifies that the SWAN Concentrator CRU is properly configured. If not, an Incorrect Logical Configuration alarm is
generated on the CRU.
196 System Resources