Group (i/o or processor enclosure), Attributes, Group – HP NonStop G-Series User Manual
Page 143: Logical, Actions, Power off, Set service led state, Group logical, Power off set service led state
Group (I/O or Processor Enclosure)
A group contains all the components that are serviced by a pair of
(SPs). For Nonstop S-Series
servers, an enclosure contains one group, and a group contains one
.
Location in OSM Tree: Under System
Examples: When the group contains a legacy Nonstop S-series IOMF2 enclosure, it has a 2-digit number, such as
Group 11-16, 21-26, etc. When the group contains VIO Modules used to provide V4SE or V8SE, it has a 3-digit
number, such as Group 111-115, 211-215, etc.
Attributes
Group
Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK.
Service State
Logical
Indication of whether the service LED is on or off.
On: An OSM user has turned on the service LED by using the Set Service LED State
action.
Off: An OSM user has turned off the service LED by using the Set Service LED State
action.
Turning on the group service LED helps you locate the group for servicing. This
feature is useful when a system consists of multiple enclosures.
NOTE:
This attribute is not displayed for a Group containing VIO Modules for V4SE
or V8SE.
Service LED State
Actions
Power Off
Upon initiating the action, it first performs precautionary checks to ensure that you can safely power off. These checks
ensure that:
•
If the group is an enclosure on the inner tetrahedral ring, there are no enclosures off this enclosure.
•
There are no IOMF enclosures off this enclosure.
NOTE:
This action is not valid for a Group containing VIO Modules for V4SE or V8SE.
If the checks complete successfully, or you choose to disregard any warnings and proceed, the action allows you to
disable the batteries and halt the processors.
After these operations complete successfully (or you choose to disregard any warnings), you can complete the action
and power off the group.
Set Service LED State
Turns the service light-emitting diode (LED) on or off for this group. Use this action to mark an enclosure to make it
easily locatable for service.
Parameter: Service LED State
on: turns LED on
off: turns LED off
NOTE:
This action is not valid for a Group containing VIO Modules for V4SE or V8SE.
Group (I/O or Processor Enclosure)
143