Mioe (ethernet controller), Attributes, Mioe – HP NonStop G-Series User Manual
Page 154: Logical, Actions, Abort, Start, Stop, Mioe logical, Abort start stop
MIOE (Ethernet Controller)
A component of
CRUs located in Group 1 only. Provides connectivity between the service processor
and the dedicated service LAN (for OSM). Each MIOE represents a single Ethernet port, known as a Physical Interface
(
) object. Each PIF is associated with a service processor (
) in Group 1.
Location in OSM Tree: System > Group > Module > PMF2 > MIOE
Slot Location: Located on PMF CRUs in slots 50 and 55 of processor enclosures in Group 1
Example: MIOE $ZZLAN.MIOE0
Attributes
MIOE
Displayed in the Attributes tab and Attributes dialog box only if the value is something
other than OK.
Service State
Logical
The configuration type of this resource.
Values: CCSA, E4SA, FESA, G4SA, GESA, TRSA, Unknown
Configured Type
The state of the component as known to the operating system on the server.
Device State
Actions
Abort
Terminates operation of the MIOE. When the Abort action finishes, it is in the Stopped state.
Start
Starts the MIOE. It must be in the Stopped state before you perform this action. When the Start action completes, the
MIOE is in the Started state.
Stop
Rather than automatically stopping the MIOE (as the Abort action does), this action first warns you if the MIOE is
currently in use (and stops it only after you confirm).
154
System Resources