Yokogawa DAQWORX - Manual (Page 136)

3-23 IM WX103-01E
1
2
3
4
5
Index
V
ewer
3.6 Savng the Dsplay Template
Procedure
Savng Templates
1. From the Fle menu, choose Save Template.
The currently displayed settings are saved as a template file to the same folder as
the displayed data.
Usng Templates
1. From the Fle menu, choose Use Template.
If the currently displayed data file is not accompanied by its display settings file, it
is displayed according to the setting information of the template file residing in the
same folder.
If the currently displayed data file is accompanied by its display settings file, it is
displayed according to the setting information of the display settings file.
Explanation
The template file is saved with the name default.mxt in the folder of the currently
displayed data.
When using a template file, the template file residing in the same folder as the displayed
data is used.
The setting information saved to the template file is as follows.
• Information about the group whose waveform or numeric display is open.
• Settings entered using the tool buttons at the top section of the waveform display area
of each group.
Alarm display ON/OFF, magnification, scale, clip ON/OFF of the waveform display.
• General Display Settings on the View menu.
• Channel No., Tag ID, or Tag comment setting on the View menu.
• Absolute Time or Relative Time setting on the View menu.
• Graph/Sheet Layout setting on the Window menu.
• Check box items in the File Information dialog box on the Information menu
The items are used as headers when the data is printed.
• Print Setting on the File menu.
Range, Color, Print Groups, and Comment.
• Position of the display screen