Saving setup data (project), Loading setup data (project), Saving setup data (project) -76 – Yokogawa DAQWORX User Manual
Page 106: Loading setup data (project) -76, Savng setup data (project), Loadng setup data (project)
2-76
IM WX103-01E
2.13 Savng/Loadng and Prntng Setup Data
(Project)
Procedure
Savng Setup Data (Project)
1. From the Fle menu, choose Save or Save As.
2. If you choose Save As or choose Save when saving the setup data for the first time,
enter the file name in the Save As dialog box and click Save.
If you attempt to save the file using an existing file name, a dialog box appears for
you to confirm whether the file is to be overwritten.
or
Loadng Setup Data (Project)
1. From the Fle menu, choose Close.
If data monitoring is in progress, a message “Stop monitoring and quit?” appears.
Click OK.
2. From the Fle menu, choose Open.
3. In the Open dialog box, select a project file and click the Open button.
Note
When you carry out the procedure above, the current setup data is discarded and changed to
the setup data of the project that is loaded. If you need the current settings, save the project
first before loading the setup data.