Teledyne LeCroy Merlin II - Users Manual - Manual (Page 98)

88
Merlin II Protocol Analyzer User’s Manual CATC SW Version 2.50
Payload Length Error
Indicates that the payload of a received Bluetooth data packet was either
longer than expected, or that a Bluetooth data packet terminated before the
expected end of the payload data.
Sync Loss
When set, indicates that a loss of piconet synchronization occurred during
the frequency slot prior to this slot.
External Input Signals
Selecting "External Input Signals" causes the analyzer to trigger on an
external signal received from the breakout board.
Breakout Board (Edge Triggered)
The following names are derived from pins on the CATC-provided breakout
board.
• TRIG IN - Selectable Edge triggered inputs. Will trigger on any
edge it detects.