Teledyne LeCroy Merlin II - Users Manual - Manual (Page 115)

105
Merlin II Protocol Analyzer User’s Manual CATC SW Version 2.50
Traffic To Hide
At the bottom of the Hiding tab of the Display Options window are check
boxes for hiding HOPs, POLLs, NULLs, and other kinds of traffic.
7.4 Saving Display Options
To complete your display options settings, use the features at the bottom of
the Display Options window. These features remain the same no matter
which of the four Display Options windows you are working in.
• Click Save to save the currently specified display options for use in
future sessions. Any file name can be specified, but you must use
the .opt extension. If no extension is specified, .opt is added by
default.
• Click Load to load a previously saved *.opt file, thus restoring a
previous set of display options.
• The Save as Default function is equivalent to the Save function,
specifying the file name default.opt. Whenever you start up the
Analyzer, it automatically loads the default.opt file if one exists.
• Click OK to apply any changes you have made to Display Options
and close this dialog box.
• Click Cancel to cancel any immediate changes you have made and
exit the Display Options menu.
• Click Apply to apply your changes while keeping the Display
Options window open.