Teledyne LeCroy Merlin II - Users Manual User Manual

Page 179

169

Merlin II Protocol Analyzer User’s Manual

CATC

SW Version 2.50

Step 3

If you intend to connect the RS232 cable directly to a serial
port on your PC, do so now. You are now done.

If you are planning to link the probe to your PC via a USB
connection, perform the remaining steps.

Step 4

Attach ’COM A’ in the RS-232 Cable [b] to ‘Connector A’
on [d], the RS232 to USB converter.

Step 5

Connect the connector marked with ‘COM B’ in the RS-232
Cable [b] to ‘Connector B’ in the RS232 to USB converter [d].

Step 6

Connect the USB cable to the RS232 to USB converter [e].

Step 7

Connect the other end of the USB cable to your PC.

Monitoring RS232 level Signals

Legend for photo:

[a] HCI Probe Cable

[b] HCI Trace RS-232 Cable

[c] Connectors A and B on the other end of the HCI Trace RS-232

Cable

[d] Two-Port RS-232 to USB Converter