Teledyne LeCroy Merlin II - Users Manual - Manual (Page 79)

69
Merlin II Protocol Analyzer User’s Manual CATC SW Version 2.50
Debug
Enable CATC debug file
Checking this box enables the creation of a file that can be used by CATC
Support to aid in debugging. This option should always be disabled unless
you are requested to enable it by CATC personnel.
6.4 Recording Options - Piconet
The Recording Options dialog box has two pages for configuring how
Bluetooth traffic is recorded: Piconet, which configures piconet recording
sessions, and Inquiry which configures inquiry recording sessions.
For recording in Piconet mode, the Piconet page lets you specify the type of
piconet you will be recording and how Merlin II should synchronize and
record the piconet.
Frequency Hopping
Stay with Basic Hopping - Configures the probe to use the Basic Hopping
sequence as defined by the Bluetooth 1.1 specification.
Follow AFH - Configures the probe to use the Adaptive Frequency Hopping
sequence as defined by the Bluetooth 1.2 specification.