Teledyne LeCroy Merlin II - Users Manual - Manual (Page 118)

108
Merlin II Protocol Analyzer User’s Manual CATC SW Version 2.50
8.3 Timing Analysis
In addition to recording and analyzing the structure and content of packets,
Merlin II analyzes time-sensitve operations such as Master-Slave switch,
park, sniff, hold, AFH, SCO and ESCO. These events are expected to occur
at specific times in the trace. The Merlin II software watches for these
events and notes their appearance or absence through the addition of special
timing cells to packets within the trace.
CAC Channel Access Code
Trail Access Code Trailer of the Sync word
Addr Active Member Address
DM1 DM1 Packet Type
Flow ACL Link Flow Control
Arqn Acknowledgment Indication Flag
Seqn Sequential Numbering
HEC Header Error Correction Code
L_CH LMP Message
L2FL L2CAP Flow Control Flag
Len Message Length in Bytes including Opcode
TID LMP Transition initiated by Master
Opcode LMP-host_connection_req
CRC Cyclic Redundancy Check
Ack’d Packet Acknowledgment based on subsequent packet’s ARQN with
same LT_ADDR
Idle Idle Time in nanoseconds
Time Stamp Decimal in Seconds.Milliseconds.Microseconds*10
This is the analyzer internal clock as a reference with resolution of
100 ns.
Packet:# Packet/Event Number