Teledyne LeCroy Merlin II - Users Manual - Manual (Page 172)

162
Merlin II Protocol Analyzer User’s Manual CATC SW Version 2.50
The dialog box shown right opens.
Source Audio Format - Select the
Source format.
Output File Format - Select an
output format: WAVE or raw.
Stream Direction - Select stream
direction that you wish to capture:
Master to Slave, Slave to Master, or
both ("Combine M/S").
Output Sampling - Select a
sampling rate for the exported audio.
Step 2 Set the parameters, then click Save.
A Save As dialog opens.
Step 3 Select the name of the file to be
created and its location, then click OK.