Teledyne LeCroy Merlin II - Users Manual - Manual (Page 125)

115
Merlin II Protocol Analyzer User’s Manual CATC SW Version 2.50
9. Searching Traces
Merlin II has several search commands that enable you to navigate a trace
in search of key events such as errors and triggers. These commands are
launched from the search menu.
9.1 Search Menu
The Search menu provides several options for searching through recorded
traffic, allowing you to find specific packets based on triggering status,
packet number, marking, or content.
• Click Search in the Menu bar.
You see the Search drop-down menu:
Go to Trigger
To display a triggering event, select Go to Trigger under Search on the
Menu bar. The Trace Viewer display will reposition the trace to show the
triggering event at the top of the screen.
Go to Packet/Message/Protocol
To display a specific packet, Message or Protocol
Step 1 Select Go to Packet/Message/Protocol under Search on the
Menu Bar.