Teledyne LeCroy Merlin II - Users Manual - Manual (Page 51)

41
Merlin II Protocol Analyzer User’s Manual CATC SW Version 2.50
within range, then press Next. The following screen will display.
You will see two options:
Step 4 In the text box, enter the length of time you want Merlin II to search
for nearby devices.
The default value is 11. If you do not sure what time value to enter, use
the default value.
Step 5 Press Next.
Before the Inquiry, Merlin II tests the hardware connection. In the case
of failure, the following screen will display.
Clicking OK will close the message box.