Teledyne LeCroy Merlin II - Users Manual - Manual (Page 121)

111
Merlin II Protocol Analyzer User’s Manual CATC SW Version 2.50
8.7 Setting Markers While Recording
Markers can be inserted into a recording in real time as a way of noting the
passage of events such as the powering on or off of a device. By entering
Markers during a recording, it becomes easy afterwards to locate events of
interest. This is especially useful with large recordings.
To set a marker during a recording,
Step 1 Wait for some key event of interest to occur - like powering off
a device.
Step 2 Click the Add Marker button to open the Marker
dialog box.
Step 3 Enter text into the dialog.
Step 4
The Marker is added to the trace near the time of the event.
Afterwards, the marker can be located by selecting Search > Go
to Markers in the menu.
8.8 Adding Comments to a Trace File
You can create, view, or edit the 100-character comment field associated
with each Trace file.
Step 1 Select Edit Comment under File on the Menu Bar.
You see the Edit comment for trace file window:
Step 2
Create, view, or edit the comment.
Step 3 Click OK.