Teledyne LeCroy Merlin II - Users Manual - Manual (Page 153)

143
Merlin II Protocol Analyzer User’s Manual CATC SW Version 2.50
To correct an improperly decrypted trace file, perform the following steps.
Step 1 With the trace open, open the Device List by selecting View
> Device List from the menu.
The Device List opens.
Step 2 Follow the directions outlined above in Section 10.11,
“Encryption” on page 140 for adding/editing encryption
settings.
Step 3
Once the new encryption settings have been applied, run the
command File > Re-apply Encryption Settings ...
A Save As dialog box opens.
Step 4 Enter a file name (or use the default) and click OK.
The file is saved and the new settings are automatically applied. The new file
opens automatically.
The file should now be decrypted properly.