Teledyne LeCroy Merlin II - Users Manual - Manual (Page 124)

114
Merlin II Protocol Analyzer User’s Manual CATC SW Version 2.50
8.12 Menus in Clicked Fields
You can display the following menu when you click in a field in a trace.
8.13 Hide Unassociated Traffic
You can hide all traffic that is not associated with the current decode level
by pressing the Hide Unassociated Traffic button on the Tool Bar.
From the Tool Bar
• First, click one or more decode buttons such as the View L2CAP
Messages
. This button will cause Merlin II to decode the trace
and display selected level of decode.
• Next, click to hide all unassociated traffic.
The Hide Unassociated Traffic button will cause Merlin II to hide all
traffic except for the selected decode messages or protocols. In the example
above, all packets would be hidden and only L2CAP messages would
display.
8.14 Hide Channel
You can hide all traffic recorded by the channel by pressing . on
the toolbar.
8.15 Hide Duplicated Traffic
On two-channel recordings some packets may be recorded by both
channels. You can hide duplicated packets by pressing on the toolbar.