Telos Zephyr Xstream - Manual (Page 98)

USER’S MANUAL
Section 5: GUIDED TOUR of the MENUS 86
5.2 The Default Screen
Encoder & Decoder
Settings
Per channel Bit Rate
& transmission Sample Rate
Active Interface (ISDN,
V.35, or Ethernet)
Status of ISDN or V.35
Lines 1 & 2
The default display (shown above) will appear after the system has been left idle for 120
seconds (unless defeated). It gives summary information on system status. At the bottom, in
inverse test is the status of each ISDN "line" or V.35 port.
w
IMPORTANT TIP!
You can defeat the timeout function that causes the default screen to appear if you wish. You
may want to do this so you can monitor some other status screen (such as the AUDIO Status
screen on the MX/MXP models).
To disable this screen, go to the 5th SYSTEM menu and set the Timeout option to "No".
5.3 The Audio Menu
5.3.1 The Zephyr Xstream's Audio Menu (non-mixer version)
AUDIO - Screen 1
Pressing the AUDIO button once will show the first AUDIO menu, with the following selections.