Telos Zephyr Xstream - Manual (Page 157)

USER’S MANUAL
Section 8: LIVEWIRE TM – IP Audio 145
Administration
IP Settings
This is where you will give the Xstream a name and configure the IP settings. The web page
looks like this:
Host name
A 12 digit, alphanumeric name for this Node that may include hyphens but NOT spaces;
those will be converted to hyphens. This name is used to identify the node on the
network. You may wish to include the location of the node (studio or rack) in the name
for ease of reference. In the example above, we have chosen a simple name of ZXS‐II.
Network address (IP Address)
This is the IP address of the Xstream codec. As you might expect, each Livewire device
must have a unique IP address. In the example above, we have chosen an address in the
192.168.0.x range. If you are looking at this page, you have obviously already assigned an
IP address to the unit and it is connected to the same LAN as your PC. Note that this IP
address must be in the same range as your other Livewire devices and the Xstream must
be physically connected to the Axia LAN. Otherwise, the Xstream will not be able to send
or receive Livewire streams to/from your Axia network.