Telos Zephyr Xstream User Manual

Page 264

USER’S MANUAL

Section 12: System Functions and Remote Control 252

with a setup index it is erased. If the exclamation mark is specified the autodial is
activated. If only 'index' is specified this setup will be displayed.

Name.......: backlight
Parameter..: <0..0x7F>
Group......: Misc
Description: Select the frontpanel LCD screen backlight.

Name.......: bitrate
Parameter..: <56|64>
Group......: Codec
Description: Choose bitrate per ISDN channel (in kbps).

Name.......: buttonlock
Parameter..: <+|->
Group......: Audio
Description: Enables/disables frontpanel mixer button locking.

Name.......: contrast
Parameter..: <0..0x7F>
Group......: Misc
Description: Select the frontpanel LCD screen contrast.

Name.......: dec
Parameter..: [ancr|init|r|rlc]
Group......: Status
Description: Display decoder status info or read ancillary (ancr) data or re-initialize
access pointers (init) or read config table (r) or reset lost lock counter (rl c).

Name.......: decomode
Parameter..:
Group......: Codec
Description: Choose decoding algorithm.

Name.......: delay
Parameter..:
Group......: Misc
Description: Delay for the given amount of milli-seconds. Useful for batch commands.

Name.......: dtmf
Parameter..:
Group......: ISDN
Description: Send DTMF tones to far end of a POTS connection or enable/disable DTMF
tone transmission.

Name.......: etherrate
Parameter..: <8|12|14|16|18|20|24|32|40|48|56|64|80|96|112|128>
Group......: Codec
Description: Choose bitrate for Ethernet operation.

Name.......: eval
Parameter..: ...
Group......: Misc
Description: Evaluate a numerical expression.

Name.......: vars