Telos Zephyr Xstream User Manual
Page 266
USER’S MANUAL
Section 12: System Functions and Remote Control 254
Name.......: ipftphost Parameter..: [
Description: Set or display the server that is used to download system and loadset
software updates. Default is ftp.zephyr.com.
Name.......: ipupdate
Parameter..: [
Group......: FTP/Telnet
Description: Connect to FTP server name or IP address and download the specified system
code file into the SIMM. DO NOT SWITCH OFF UNIT DURING UPDATE!!
Name.......: iptelnet
Parameter..: [
Group......: FTP/Telnet
Description: Dump statistics on current telnet sessions or shutdown the telnet session
with given number or shutdown all sessions or send a message to a given session or all
sessions. Telnet session numbers start with 1.
Name.......: iptrusted
Parameter..: [
Group......: FTP/Telnet
Description: Specify a host name or IP address (base 10) which is allowed to login thru
Telnet and has the same rights as a RS232 session.
Name.......: isdnautoans
Parameter..:
Group......: ISDN
Description: Select ISDN autoanswer mode.
Name.......: isdni
Parameter..: [N|T]
Group......: ISDN
Description: Display status information of all lines. If option N is specified this
will print all SPID and DN/MSN numbers. Option T displays call times.
Name.......: isdnspid
Parameter..:
Group......: ISDN
Description: Set or delete SPID number.
Name.......: isdndn
Parameter..:
Group......: ISDN
Description: Set or delete MSN resp. DN number.
Name.......: isdnmsn
Parameter..:
Group......: ISDN
Description: Set or delete MSN resp. DN number.
Name.......: isdndisc
Parameter..: [
Group......: ISDN
Description: Disconnect call on given line. If no line is specified all calls will be
disconnected.
Name.......: isdnaccept
Parameter..:
Group......: ISDN
Description: Accept incoming call on given line.
Name.......: isdncall
Parameter..:
Group......: ISDN
Description: Make outgoing call on given line.
Name.......: isdntelco
Parameter..: <5ESS|DMS100|NI1|Net3|Ins64>
Group......: ISDN