Telos Zephyr Xstream - Manual (Page 84)

USER’S MANUAL
Section 4: BASIC OPERATION & INSTALLATION 72
Editing Dial Setups
1. If this setup includes codec information, configure the Zephyr Xstream’s
CODEC menu as it will be used when connected to this location. If the
existing codec information included with this setup is correct, simply
activate the setup to recall those settings now (then drop the call (s) by
pressing drop 4 times). If you are editing a Dial Setup that does not include
codec settings you can skip this step.
2. Press the key. Choose the Dial Setup to be edited.
To choose a Dial Setup you have two options:
• Use the < 5> and <6> to scroll through the list of 100 Dial Setups.
• Or: Use the Keypad to enter the 2‐digit number (00 to 99) for the
desired setup. That setup will be displayed and will be highlighted.
3. Once the desired setup is highlighted, press the button. The name of
the setup will be displayed.
4. Press < 5> and then to edit the setup.
5. Edit the name, number 1 or 2, or call type 1 or 2 (see the beginning of this
section for an example on how to select and enter information).
6. You can choose whether to Include Codec settings or not by choosing this
menu selection. The choices are Number (no codec information included
with this dial setup) or Number & Codec.
If Number & Codec is selected, the system will include the current settings in
the CODEC Menu with this setup. Each time this setup is activated, the
system will reset the CODEC Menu items to these setting before dialing the
number(s) for this setup.