Telos Zephyr Xstream - Manual (Page 158)

USER’S MANUAL
Section 8: LIVEWIRE TM – IP Audio 146
w
IMPORTANT!
If you change this unit’s IP address, you will lose your browser connection when you click
Apply. It will be necessary to reconnect using the new IP address.
Gateway (Router)
A gateway will be required if you are using the IP streaming method of communicating to
another Xstream codec.
NTP Server
An NTP server is optional and not currently required for the Xstream.
User password
By default, the user name is “user” and the password is blank. We suggest you leave it this way
until you get everything operating properly.
Firmware version
As with all other Axia devices, the Xstream has two internal memory banks. Each bank contains
room for a complete version of operating software. This approach allows a software update
download to be completed and checked without danger of making the unit inoperable if the
download were to be incomplete or corrupted. It also provides an easy way to try a new
software version and return to the old version if desired.
The software version in each bank is displayed here. To change banks simply click in the “radio
button” for the desired bank and then click on .
w
IMPORTANT!
The node will reboot after you click Apply if you change the software version. This will result
in loss of audio locally, and at any unit using the Xstream’s Livewire sources
Saving Bank 1 Software
New software is always downloaded to Bank 1 (the secondary bank). Downloading software
(see below) will overwrite the software currently in this bank, if any. If you wish to save the
software currently residing in Bank 1, you can save it by moving it to memory bank 0 by checking
and applying the box designated with “commit this version to Bank 0”. Once you perform this