Telos Zephyr Xstream - Manual (Page 76)

USER’S MANUAL
Section 4: BASIC OPERATION & INSTALLATION 64
Example 2: Entering a numeric entry (i.e. entering a SPID):
1. Press the button twice. You should see a screen that looks like the
following:
2. Verify that the menu item “SPID 1” is highlighted (i.e. is shown with white
text on a black background). If not, use the < 5> button to highlight this
menu selection.
3. Press the button once. Note that the menu item moves to the top of
the screen and information about “SPID 1” is displayed.
4. Press the < 5> button repeatedly to erase any existing information.
5. Type in the new SPID number using the Zephyr Xstream’s keypad.
w
IMPORTANT TIP!
You can press the <TEL> button at any time to “escape” without saving the changes you
have made.
IF THIS UNIT HAS ALREADY BEEN PROGRAMMED YOU SHOULD PRESS <TEL>
NOW!
6. Press to confirm your entry. Or, press to ignore the information
and abort the entry process.
More on the Numeric Keypad – Entering Alphabetic Characters
A given keypad button corresponds to the number printed on it. It can also be
used for text entry of the letters below it. Additional characters are available on
the <*> key (i.e. * ( [ ] < > ) and the <#> key (i.e. # . , ; : ! ? ) and
underscore is available on the <1> key.
To enter text characters, press the key with the appropriate letter printed near
it. Keep tapping it to cycle through the possible choices. For example, tapping