Telos Zephyr Xstream - Manual (Page 118)

USER’S MANUAL
Section 5: GUIDED TOUR of the MENUS 106
Interface – This is the current setting of the Interface option located on the third TEL menu.
SYSTEM - Screen 2
This menu has the most frequently used System menu items. These are:
Contrast
This allows you to change the contrast of Xstream's LCD display to accommodate differing room
lighting or viewing angle.
Volume
No, this doesn't belong in the AUDIO menu... this volume selection is to adjust the volume of the
different sounds the Xstream makes when keys are pressed, calls connect, or other things
happen.
rs232
This allows you to easily set the bit rate of the Zephyr Xstream's RS‐232 port on the rear panel.
About
This gives you information about your Xstream.
SYSTEM - Screen 3
Pressing the SYSTEM button a third time shows this screen with the selections needed to
configure your IP (Internet Protocol) settings. You won't need to enter this to operate the unit
from the front panel. You will need to enter this information if you will be connecting to the
Xstream's Ethernet port (i.e. if you are using Livewire, will be using the Ethernet streaming
mode, or will be controlling the unit remotely using a web browser).
You will also need to enter these items when the time comes to update the Xstream's operating
software. For more information, see Section 11 (Detailed Menu Reference) and Section 13
(Deep Tech & Troubleshooting
Info.)