Telos Zephyr Xstream - Manual (Page 101)

USER’S MANUAL
Section 5: GUIDED TOUR of the MENUS 89
This disables the input processor for channel "x".
Voice L:
(Voice Low) This is the least aggressive setting, intended to protect against
minor level problems when running a live show. It provides AGC with no
limiting. Ideally where you want the most natural sound in live situations where
mixing could be difficult.
Voice M:
(Voice Medium) This is a moderate setting. It combines AGC with a small
amount of limiting. This provides good dynamics control, and also serves to
"beef up" the voice. This setting is the most frequently used general purpose
option. Do not use this setting for music.
Voice H:
(Voice High) This is an aggressive setting employing both AGC and limiting. This
setting is perfect for easily excited talent such as sportscasters. Do not use this
setting for music.
Music:
This setting offers a slow AGC only.
Low Cut
This is a low cut filter designed to reduce wind noise, pops and breath noise. This can be
enabled independently for each input.
AUDIO - Screens 6 & 7
&
These screens are used to set up Local Mix 1 (screen 6) and Local Mix 2 (screen 7). The following
options allow the operator to customize the Local Mixes as required for different applications
are as needed to accommodate talents' needs. The following selections are displayed are
offered.
Mon “x” Balance
This adjustment allows you to vary the ratio of Send to Receive audio in Local Mix x. This control
has no effect if both SND and RCV have not been selected on the front panel.