Telos Zephyr Xstream User Manual
Page 23
USER’S MANUAL
Section 1: QUICK RESULTS
11
Note: Since this is a local call, you probably do not need a “1” or area code.
2. Press the
“Seize Pending; Out Ring; Connected.” If successful, the receive LOCK LEDs
will light (it might take a few moments), and, if you are sending audio into
your Zephyr, you will see activity on both the Send and Receive meters. If
connected to your studio audio gear, you should be able to hear the audio
feed from the “Output: Receive from Network” audio outputs, or your
headphones.
3. Whether or not you have successfully connected, slowly press the
button repeatedly until both of the LINE status indicators have returned to
“Ready”. This may take up to four presses.
4. If you have successfully connected, go on to the next section. If you have
not, try again. Try dialing the other line number provided to you. You may
wish to try with an area code or 1. If you fail after a few more attempts,
contact Telos Customer Support or your local Telos Representative.
1.6 Your Next Call, to Telos
Located less than a mile from the Rock ‘n’ Roll Hall of Fame, there is always something
interesting playing on the Telos ISDN test line. Let’s call Cleveland. If you prefer, you can call our
test line in Europe. That number is listed under “Test Lines” on page iii at the front of this
manual. Be certain to call a Layer‐3 line.
Follow these step‐by‐step instructions:
1. Press the
line number. Be certain to precede it with any number you may need to dial
to access an outside line and/or to place a long distance or international
call. The first number is +1 216.781.9310. Press the
2. You should see a series of messages that say “Seize Pending; Outgoing
Seize; Out Ring; Connected.”
If successful, the green Lock LED over the left Send meter will be
illuminated. You may not hear audio or see any meter action until you have
connected the second line. If you do not connect, go to step 5, below.
3. Press the
test line number. Again, be certain to precede it with any number you may
need to dial to access an outside line and/or to place a long distance or
international call. The second number is +1 216.781.9311. Press the
button again.