Telos Zephyr Xstream - Manual (Page 119)

USER’S MANUAL
Section 5: GUIDED TOUR of the MENUS 107
SYSTEM - Screen 4
Current Version Legacy Versions
The fourth press of the SYSTEM button brings you to the reboot or FTP screen used to update
the Zephyr Xstream's software. Older versions of the software use an FTP site for updates.
Current versions are updated via their web page interface. For more information, see Sections
11 (Detailed Menu Reference) and 13 (Deep Tech & Troubleshooting Info.)
Reboot
This option is used to restart the Xstream without cycling power. It can be handy. The Xstream
is designed for long term operation without user intervention. If you frequently experience
problems that seem to be solved by rebooting, be sure to contact Telos with all relevant details,
so we can assist you in determining the cause.
SYSTEM - Screen 5
The fifth SYSTEM menu screen has several options, as follows:
Loopmode
This allows you to activate various loop modes used to troubleshoot the unit and its
environment. This should normally be set to None, and will revert to that value on startup. See
Section 13 (Deep Tech & Troubleshooting) for troubleshooting information.
Timeout
This determines whether the system will return to the default screen after a period of inactivity.
The default setting is "Yes" meaning that the system will return to the default menu after 120
seconds of inactivity.
Ancillary
See Section 11 (Detailed Menu Reference) for details on this option. The usual setting is "On"
which is the default.