Telos Zephyr Xstream - Manual (Page 192)

USER’S MANUAL
Section 10: APPLICATIONS GUIDE 180
Zephyr (classic) at far end:
Transmit Mode at Far End: Set Local Receive Mode to: Set Local Sample Rate to:
° L3 DUAL or L3 MONO L3 Dual/Mono 32 or 48 kHz
L3 STEREO L3 32 or 48 kHz
L3 JSTEREO L3 32 or 48 kHz
G.722 G.722 * Any
L2 MONO L2 64 48 kHz
L2 MONO128 L2 48 kHz
° L2 STEREO or L2 DUAL L2 48 kHz
L2 JSTEREO L2 48 kHz
L2 HALF/24 L2 64 + Any
Sample rates on the two ends must match
* Actual Sample Rate will be 16 kHz regardless of setting
+ Actual Sample Rate will be 24 kHz regardless of setting
° Name will depend on software version
ZephyrExpress at far end:
Transmit Mode at Far End: Set Local Receive Mode to: Set Local Sample Rate to:
L3-DUAL L3 Dual/Mono 32 or 48 kHz
L3-STEREO L3 32 or 48 kHz
L3-JOINT L3 32 or 48 kHz
G.722 G.722 * Any
L2-MONO64 L2 64 48 kHz
L2-MONO128 L2 48 kHz
L2-DUAL L2 48 kHz
L2-JSTEREO L2 48 kHz
L2-HALF/24 L2 64 + Any
Sample rates on the two ends must match
* Actual Sample Rate will be 16 kHz regardless of setting
+ Actual Sample Rate will be 24 kHz regardless of setting