Telos Zephyr Xstream User Manual
Page 245
USER’S MANUAL
Section 11: THE WORKS – Detailed Menu Reference 233
w
IMPORTANT TIP!
The software download process must not be interrupted. Be sure your Xstream is connected
to a reliable source of power before proceeding. Do not power off the unit until the software
update is complete, or the unit has displayed an error and aborted the update process.
h
HOT TIP!
If you don't know a valid DNS (domain name sever) IP address, you can still update your
Xstream by obtaining the IP address of the FTP computer as follows:
1. Go to the MS-DOS command line of the Windows machine (Run " cmd
2000 or Win NT; or Run "command
2. From the command line type "ping ftp.zephyr.com
3. You should receive a reply. If you do not get a reply check with your IT manager for
assistance - your firewall may not allow FTP access. The reply will include the current
IP address of the Telos FTP server.
4. Enter this IP address as "FTP site" in the Xstream.
Reboot
This option is used to restart the Xstream without cycling power. It can be handy. The Xstream
is designed for long‐term operation without user intervention. If you frequently experience
problems that seem to be solved by rebooting, be sure to contact Telos with all relevant details
so we can assist you in determining the cause.
SYSTEM - Screen 5
The fifth SYSTEM menu has options, as follows:
Loop mode
This allows you to activate various loop modes used to troubleshoot the unit and its
environment. This should normally be set to None.