Telos Zephyr Xstream - Manual (Page 55)

USER’S MANUAL
Section 3: GUIDED TOUR of the HARDWARE 43
then the lower‐case letters, then the number 2. Enter a space by pressing 1 three times.
Punctuation characters appear on the * and # keys. The period “.” is one the # key.
For example:
Press the number 2 once ...... See the character A
... press it again ...... See the character B
... press it again ...... See the character C
... press it again ...... See the character a
... press it again ...... See the character b
... press it again ...... See the character c
... press it again ...... See the numeral 2
... press it yet again ...... the cycle starts again from A
To move to the next character in a field, tap any other key or press the <
6> button. To back up
(delete), press the < 5> key.
AUTO
, DIAL, & DROP Keys
These keys will be covered in greater detail in Section 4.2 (Basic Installation & Operation).
AUTO
The key allows access to Zephyr Xstream’s 100 stored Dial Setups (#00
to #99). These can be accessed by pressing <AUTO>, entering two digits, and
then pressing <AUTO> again.
It can also be used to access the 30 Location Setups (#100 to 129) can be
accessed to configure the ISDN settings for frequently visited locations. Press
and hold the <
6> key to jump to the Location Setups. Or, press enter 3
digits and press again.
DIAL
The key is used to manually dial a number. Press, , enter the phone number and
press . To redial the last number dialed simply press twice.
DROP
The key is also straightforward in its most basic form. Pressing twice will drop
any call on “Line 1”. If “Line 1” is idle, it will drop any call on “Line 2”. Therefore, pressing
four times will clear both lines. Of course you also have the option of choosing a
specific line to drop.