Telos Zephyr Xstream - Manual (Page 49)

USER’S MANUAL
Section 3: GUIDED TOUR of the HARDWARE 37
AC (Mains) power
The AC receptacle connects mains power to the unit with a standard IEC
(International Electrotechnical Committee) power cord and provides an
on/off switch. The power supply has a “universal” AC input, accepting a
range from 100 to 240 VAC, 50‐60 Hz. A fuse is located inside on the power
supply circuit board.
w
IMPORTANT!
As with any piece of modern electronic gear, it is advisable that precautions be taken to
prevent damage caused by power surges. Standard line surge protectors can be used to
offer some degree of protection. It is the user’s responsibility to ensure protection
adequate for their conditions is provided.
Section 4 (Installation & Basic Operation) has additional information.
e
WARNING!
This equipment is designed to be operated from a power source, which includes a third
“grounding” connection in addition to the power leads.
Do not defeat this safety feature. In addition to creating a potentially hazardous situation,
defeating this safety ground will prevent the internal line noise filter from functioning.
w
IMPORTANT SAFETY INFORMATION!
If fuse replacement is required, please note: For continued protection
against fire, replace fuse only with same type and value. See the DETAILED
TECHNICAL INFORMATION section for information and cautions.
e