Telos Zephyr Xstream - Manual (Page 193)

USER’S MANUAL
Section 10: APPLICATIONS GUIDE 181
Zephyr Xport at the far end
When Xport is on ISDN use the "Zephyr" Dial Mode selection on the dialing Xstream or Xport:
• Transmit ‐ AAC‐LD Mono 64
• Receive ‐ AAC‐LD Mono 64
• Sample Rate : 48 kHz
• Connect on one B channel only
When Xport is on POTS use the "Xport" Dial Mode selection on the dialing Xstream or Xport:
• No configuration necessary
Comrex Nexus at far end
Use the following settings on the Xstream:
• Transmit ‐ G.722
• Receive ‐ G.722
• Sample Rate ‐ Any
• Connect on one B channel only.