TROY Group MAN-EXT2000 - Manual (Page 99)

Novell Network Configuration 5-27
Printer icon and then execute the following steps when you
get to the Add Printer Wizard.
1. Click on Next, Select Network Printer and click on
Next again.
2. Select Browse, double click on the appropriate file
server name, select the print queue, and click OK. If
you used JetAdmin to configure the queue, you should
double click on the HP_Network_Printers icon
instead of the file server icon, and then select the
TROY XCD print server name. Click on Next.
3. Select the desired printer manufacturer and model
(click Have Disk if your printer is not listed), and click
on Next.
4. If the driver already exists, select Keep Existing
Driver (if it does not, this step will be skipped), and
then click on Next.
5. If desired, change the name of the printer and/or make
it the default, and then click on Next.
6. Select Yes when you are asked "Would you like to
print a test page?" Click on Finish.
Configuring the Workstation (Windows NT 4.xx)
To add a queue from a Windows NT 4.xx workstation,
execute the following steps: NetWare Windows VLM
drivers and utilities installed. Then go to the Start button,
choose Settings, and then select Printers. Double click on
the Add Printer icon and then execute the following steps
when you get to the Add Printer Wizard: