TROY Group MAN-EXT2000 - Manual (Page 248)

D-14 Glossary and Index
Reset In printing, a reset is a one or more characters sent after a print job.
Usually, the purpose of a reset is to restore the printer back to its normal
state. pp. B-2 through B-4.
RJ45 A type of modular jack connector similar to a telephone connector
but with 8 wires. Used for 10baseT Ethernet connections and for serial
port connections. pp. 2-9, 2-13.
Router A device that connects networks together. A router operates at
level 3 of the OSI Reference model. A router is called a gateway in TCP/
IP terminology. pp. 4-18, 4-21, A-13.
RPRINTER The method for connecting a remote printer to a print server
in NetWare V3.xx and V2.xx. Replaced by NPRINTER in NetWare
V4.xx. pp. 5-18 to 5-25.
RS-232 The most common serial interface electrical standard. p. 2-8.
RS/6000 IBM's RISC-based family of computers. pp 4-5; 4-7 to 4-8.
SCO UNIX A PC-based UNIX developed by the Santa Cruz Operation.
pp. 4-4, 4-9, 4-10.
Segment A physically or logically separate part of a network, usually a
different cable, that is joined with other segments of the network via a
repeater, bridge, or router to form the complete network.
Serial Port On a printer or print server, a port that transfers data one bit at
a time. Serial ports usually have either 25-pin, 9-pin "D", or RJ45
connectors. pp. 1-3; 2-8 to 2-11.
Server A device on a local area network that provides services to client
computers on the network. See File Server, Print Server.
Service A capability offered by a node on a network. A single node can
have multiple services available. Appendix B.
Setup string. A series of characters that is sent before a print job.
Usually the purpose of a setup string is to put the printer in a special state
(for example, landscape mode). pp. 11-6; Appendix B.
Shell Script The UNIX equivalent of a batch file. See batch file.