TROY Group MAN-EXT2000 - Manual (Page 96)

5-24 Novell Network Configuration
f. PCONSOLE will assign a Printer Number.
Remember this number, since it will be used later.
g. Highlight Print Queues Assigned and press
ENTER and then INSERT to get a list of available
queues.
h. Highlight the name of the print queue you wish to
assign to the remote printer and press ENTER.
i. The other settings in the menu are not required.
Push ESCAPE several times to exit PCONSOLE.
j. Skip to step 5 below.
The following steps apply to configuring a remote printer
on NetWare 3.xx systems:
a. Select Print Server Information from the
PCONSOLE main menu and choose the name of
the PSERVER NLM.
b. Select Print Server Configuration and then
Printer Configuration. Select any "Not Installed"
printer and press Enter. Remember the number of
this printer, since it will be used later in the
configuration process.
c. If desired, type in a new name for the printer.
d. Go to Type, press ENTER, highlight Remote
Other/Unknown and press ENTER again. The
other settings in this menu are not required.