TROY Group MAN-EXT2000 - Manual (Page 88)

5-16 Novell Network Configuration
5. Associate the printer with the print queue:
- Change context if required and then double click on
the name of the printer you created in step 3.
- Click on Assignments and then Add...
- Change context if necessary and select the print
queue you created in step 4. Click OK and then OK
again
6. Associate the print server with the printer:
- Change context if required and then double click on
the name of the print server you created in step 5.
- Click on Assignments and then Add...
- Change context if necessary and select the printer
you created in step 3. Click OK and then OK again.
7. Exit NWAdmin. You are now ready to use the print
queue from a NetWare workstation.
Configuring the Print Server and Print Queue Using
PCONSOLE and XCONFIG (Queue Server Mode)
As an alternative to JetAdmin and XAdmin, you can use the
standard Novell PCONSOLE utility in conjunction with
TROY XCD's XCONFIG program to set up your print
queues (note that if desired, you may use TELNET, the DEC
NCP utility, or the serial port instead of XCONFIG). The
procedure is basically as follows:
1. Use XCONFIG to connect to the print server. Enter the
password (ACCESS is the default) and type anything in
response to the
Enter Username> prompt.