TROY Group MAN-EXT2000 - Manual (Page 207)

Command Summary A-5
SET PORT DMA [EN|DIS]
Enables/disables DMA support on parallel port (not available on Pony
Print Server Plus or XConnect II Lite)
SET PORT FSTB [EN|DIS]
Enables/disables fast strobe mode support on parallel port
SET PORT NBUF [EN|DIS]
Enables/disables no buffer support on parallel port
SET PORT FLow [NO|XO|CT|DS]
Set serial port flow control to NONE, XON/XOFF, CTS, or DSR
SET PORT PArity
Set serial port parity to NONE, EVEN, ODD, MARK, or SPACE
SET PORT SIgnal [EN|DIS]
Enables/disables DTR signal check on serial port
SET PORT SPeed
Sets serial port baud rate from 300 - 57600 bits per second
SET PORT STop [1|2]
Sets serial port stop bits per character
SET PROtect
Set console protection password to prevent access to SET commands (use
UNPROTECT command to access SET commands)
SET SERVEr DEscription
Sets node description string displayed with SHOW SERVER command
SET SERVEr STRing n "..."
Defines server BOT/EOT string (see Appendix B)
SET SERVIce [EN|DIS]
Enable or disables specified protocol on the specified service.
SET SERVIce BOT nn
Set service BOT string to nn (see Appendix B)