TROY Group MAN-EXT2000 - Manual (Page 130)

9-6 NetBEUI Configuration
2. Using the right mouse button, drag the Printer
template onto the desktop.
3. Type in any desired name for the printer from the
Create a Printer window.
4. Choose an unused port (for example, LPT3) to connect
to the printer.
5. Choose the appropriate printer driver from the list.
6. Click Create and then OK.
7. If desired, indicate whether you want to share the printer.
OS/2 Workstation Configuration:
On each workstation that you wish to print from, execute the
following step:
1 Go to the DOS or OS/2 command prompt and enter the
command:
NET USE LPT x: \\servername\servicename
where “x” is the LPT port number (1 through 9),
servername is the print server name (XCD_xxxxxx) by
default, where “xxxxxx” is the last six digits of
Ethernet address and servicename is the service name,
(BINARY_P1, BINARY_S1, BINARY_P2, or
BINARY_S2)
NET USE LPT2: \\XCD_002477\BINARY_P1