TROY Group MAN-EXT2000 - Manual (Page 54)

4-8 TCP/IP Network Configuration
- Name of queue (user selectable)
- Host Name of Remote Printer (TROY XCD
Print server name; must match name /etc/hosts
file or use TROY XCD print server IP address)
- Name of queue on remote server (TROY XCD
print server binary or text service name)
- Type of print spooler: BSD (press the list
button and choose BSD).
The procedure for pre-V4.0 systems is as follows:
1. Enter smit and select "Devices"
2. Select "Printer/plotter"
3. Select "Manage remote printer subsystem"
4. Select "Client services"
5. Select "Remote printer queues"
6. Select "Add a remote queue"
7. Enter the following remote queue settings:
- Name of queue to add (user selectable)
- Activate the queue (Yes)
- Destination host (TROY XCD print server
name; must match name in /etc/hosts file or use
the print server IP address)
- Name of queue on remote printer
(TROY XCD print server binary or text service
name)
- Name of device to add (user selectable; for
example
lp0 )
Sun Solaris 2.x Configuration
Sun Solaris 2.x uses the lpsystem and lpadmin
programs for remote printer configuration: