TROY Group MAN-EXT2000 - Manual (Page 206)

A-4 Command Summary
CLear POrt portname JOB
Clears current entry in the print server's internal queue for the specified
portname (P1 for the first parallel port, S1 for the first serial port, P2 for
the second parallel port, and S2 for the second serial port)
CLear SERVEr STRing n
Remove BOT/EOT string (see Appendix B)
EXIT/^D
Exits print server console
HElp
Provides information on available commands
SET DEFAULT
Sets print server parameters to factory defaults
SET LOAD DIsable
Disables firmware reload after exit
SET LOAD ENable
Enables firmware reload after exit
SET LOAD HOst
Sets node name of boot host for (NetWare firmware load)
SET LOAD IP aa.bb.cc.dd
Sets IP address of load host (TCP/IP firmware load)
SET LOAD SOftware
Sets host filename of firmware to load
SET LOAD XModem
Begins XModem serial download of new firmware
SET PAssword
Sets console password (default password is ACCESS)
SET PORT BIDir [EN|DIS]
Enables/disables bidirectional communications on parallel port, where
is P1 for first parallel port or P2 for second parallel port