TROY Group MAN-EXT2000 - Manual (Page 85)

Novell Network Configuration 5-13
2. If you are using XAdmin, start it up by double clicking
on the icon.
If you are using WebXAdmin, start up your web
browser (you must have a valid IP address configured in
the PC and in the print server).
3. If you are using XAdmin, one or more TROY XCD
print server NetWare services will show up in the list of
printers (the default services names are listed in the
Default Print Server Names section at the beginning of
this chapter). Double click on the one that you wish to
configure.
If you are using WebXAdmin, enter the IP address of
the print server as the destination address in your
browser and press ENTER or RETURN.
4. Enter the configuration password (ACCESS is the
default) and press OK (XAdmin) or Submit
(WebXAdmin).
5. If you have XAdmin, click on the NetWare tab.
If you are using WebXAdmin, click on Configure
NetWare. You will see one or more enabled services
(the default service names are listed in the Default Print
Server Names section at the beginning of this manual).
Click on the desired service.
6. If you are using NDS, type in the tree and context (the
context may be entered in either the form
printers.mytree or OU=printers.O=mytree. If you
are using XAdmin, click OK, Yes, and OK to save the