TROY Group MAN-EXT2000 - Manual (Page 72)

4-26 TCP/IP Network Configuration
9. Print a job using the lp command. For example,
lp -dlaser_1 /etc/hosts
If you need a different TCP port number or if you want
additional TCP ports, you may define a TCP port number on
any TROY XCD print server service by using the
SET SERVICE servicename TCP nn
where servicename is the name of the service, and nn is the
desired port number (must be greater than 1023). Refer to
Appendix A for information on using the console.
Changing the Configuration (Optional)
You may use TELNET, the DEC NCP utility, the XCONFIG
NetWare utility, or the XConnect II/Pony 100/XConnect 100
serial port to connect to the TROY XCD print server remote
console and change the configuration or view the status. The
procedure and configuration commands are described in
Appendix A.